FDA Finger Tip Pulse Oximeter, spo2 blood oxygen O2 Monitor, USA Warehouse

$10.79 Buy It Now 28d 20h, FREE Shipping, 60-Day Returns, eBay Money Back Guarantee

Seller: michewan-0 (469) 100%, Location: 1440 Chase Ave ELK Grove Village IL, Ships to: US, Item: 253749341133 Fingertip Pulse Oximeter Description Introduction CMS50M Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means for quantitative measurement of oxygen saturation. CMS50M Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc. Features 1) Can measure SpO2 and Pulse Rate accurately2) SpO2 and Pulse Rate display,bar graph display 3) Battery voltage low indication4) Shut off automatically when no signal Performance SpO2 measurement range: 0%~100%Accuracy: 70%~100%: ±2% 0%~69%: unspecifiedPR measurement range: 30bpm~250bpmAccuracy: ±2bpm or ±2%, whichever is greater.Resolution: SpO2: 1% PR: 1bpm Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2%, whichever is greater.Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.Working current: ≤25mAPower supply: two “AAA” batteriesSafety classification: type BF applied part Physical characteristic Dimension: 57mm(L) × 34mm(W) × 31mm(H) 1.IntroductionCMS50NA Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means for quantitative measurement of oxygen saturation. CMS50NA Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc. 2.Features1) Can measure SpO2 and Pulse Rate accurately2) SpO2 and Pulse Rate display,Pulse Rate waveform and bar graph display 3) Battery voltage low indication4) The display mode can be changed.5) Screen brightness adjustable 3.Performance SpO2 measurement range: 0%~100% Accuracy: 70%~100%: ±2% 0%~69%: unspecifiedPR measurement range: 30bpm~250bpmAccuracy: ±2bpm or ±2%, whichever is greater.Resolution: SpO2: 1% PR: 1bpmMeasurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2%, whichever is greater.Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.Working current: ≤30mAPower supply: two “AAA” batteriesSafety classification: type BF applied part 4.Physical characteristicDimension: 57mm(L) × 34mm(W) × 31mm(H) InstructionsPrinciple of the CMS50L Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc. Major Features Integrated with SpO2 probe and processing display moduleSmall in volume、light in weight and convenient in carryingOperation of the product is simple ,low power consumptionSpO2 value displayPulse rate value display, bar graph displayLow-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltageAutomatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe.Main performance Display Mode: LED displaySpO2 Measuring Range: 0%~100%(the resolution is 1%)Accuracy: 70%~100%: ±2% ,Below 70% unspecified.PR Measuring Range: 30bpm~250bpm (the resolution is 1bpm)Accuracy: ±2bpm or ±2% (select larger)Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.Power Consumption: less than 25mAVoltage:DC 2.6V~3.6V Power Supply:1.5V (AAA size) alkaline batteries × 2 Battery working hour:The minimum continually work time is 24 hours , theoretical number is 56 hoursSafety Type:Interior Battery, BF TypeAccessories Sell in standarda hanging ropea user manualPhysical IdentityDimension:66(L) × 36(W) × 33(H) mmWeight:About 55g (with the batteries)CE、FDA PassedInstructionsPrinciple of the CMS50DL Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc. Major Features Integrated with SpO2 probe and processing display moduleSmall in volume、light in weight and convenient in carryingOperation of the product is simple ,low power consumptionSpO2 value displayPulse rate value display, bar graph displayLow-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltageAutomatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe.Various color of cover can be selectedMain performance Display Mode: LED displaySpO2 Measuring Range: 0%~100%(the resolution is 1%)Accuracy: 70%~100%: ±2% ,Below 70% unspecified.PR Measuring Range: 30bpm~250bpm(the resolution is 1bpm)Accuracy: ±2bpm or ±2% (select larger)Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.Power Consumption:less than 25mAVoltage: DC 2.6V~3.6VPower Supply:1.5V (AAA size) alkaline batteries × 2 Battery working hour: The minimum continually work time is 24 hours, theoretical number is 56 hours.Safety Type:Interior Battery, BF TypeAccessories Sell in standarda hanging ropea user manual Physical Identity Dimension:57(L) × 31(W) × 32(H) mmWeight:About 50g (with the batteries) CE、FDA Passed 1.Introduction Principle of the CMS50DA Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc. 2.Major Features1)SpO2 value display2)Pulse rate value display, bar graph display3)Pulse waveform display4)Screen brightness can be changed5)Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage、Automatically power off function: when the device is under the state of measuring interface . it will automatically power off within 5 seconds if the finger falls out of probe6)Display format can be saved after power off 3.Main performance1) Display Mode:0.96" Dual-color OLED display(blue and yellow)2) Screen Resolution:128*64Accuracy:70%~100%:±2% ,Below 70% unspecified.4) PR Measuring Range:30bpm~250bpm, (the resolution is 1bpm)Accuracy:±2bpm or ±2% (select larger)5) Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).6) Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%7) Power Consumption:less than 30mA8) Voltage: DC 2.6V - 3.6V9) Power Supply:1.5V (AAA size) alkaline batteries × 210) Battery working hour: Two batteries can work continually for 20 hours,The theoretical number is 36 hours11) Safety Type:Interior Battery,BF Type 4.Accessories1)a hanging rope2)a user manual 5.Physical characteristicDimension:57(L) × 31(W) × 32(H) mmWeight:About 50g 6.CertificationCE FDA InstructionsThe CMS60C Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology in accordance with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for being used in hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising). FeaturesSmall in volume, light in weight and convenient in carryingEasy to operate, low power consumptionOperation menu for function settingsSpO2 value displayPulse rate value display, bar graph displayPulse waveform displayDisplay direction can be changedScreen brightness can be changedPulse rate sound indicationWith measured data overruns limits and low-voltage alarm function, the upper/lower alarm limit can be adjustedBattery capacity indicationLow-voltage indication: Low-voltage indication appears before working abnormal caused by low voltage.Data storage function, stored data can be uploaded to computerData transmission in real-timeExternal SpO2 probe PerformanceDisplay mode: 1.77" TFT color screenScreen resolution: 128*160SpO2 measuring range: 0%~100% (resolution is 1%)Accuracy: 70%~100%: ±2%, Below 70% unspecified.PR measuring range: 30bpm~250bpm (resolution is 1bpm)Accuracy: ±2bpm or ±2% (whichever is greater)Measurement performance in weak filling condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2bpm or ±2% (whichever is greater).Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.Voltage: DC 3.6V~4.2VPower supply: 3.7V rechargeable lithium battery × 1Battery working hour: 26 hours in theoreticalBattery service life: no less than 500 times of charge and dischargeSafety type: Internally powered equipment, Type BF applied part AccessoriesStandard:◆User Manual 1pc◆Lithium battery 1pc◆Power adapter 1pc◆Data line 1pc◆CD (PC software) 1pc◆Probe 1pcOptional:◆Other SpO2 probes Physical characteristicDimension: 87(L) × 45(W) × 22(H) mmWeight: about 75g (with one lithium battery) Instructions Principle of the CMS60D Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc. Major Features Small in volume、light in weight and convenient in carrying Operation of the product is simple ,low power consumption Operation menu for the function setting SpO2 value display Pulse rate value display, bar graph display Pulse waveform display Screen brightness can be changed Pulse rate sound indication With review function With clock function With measured data overruns limits and low-voltage alarm function Battery capacity indication Low-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage ,and with alarm function With SpO2 value and pulse rate value of storage, the storage data can be uploaded to computers Real-time data can be transmitted to computers Connected with an external oximeter probe Main performance Display Mode: 1.8" Color OLED display Screen Resolution: 160*128 SpO2 Measuring Range:0%~100%(the resolution is 1%) Accuracy: 70%~100%: ±2%, Below 70% unspecified. PR Measuring Range: 30bpm~250bpm, (the resolution is 1bpm) Accuracy: ±2bpm or ±2% (select larger) Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger). Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%. Power Consumption: less than 100mA Voltage: DC 2.6V~3.6V Power Supply: Dry battery(2AA) Battery working hour: The theoretical number is 44 hours. Safety Type:Interior Battery, BF Type Accessories Sell in standard A user manual Adata line A disk (PC software) An oximeter probe Sell in addition Other oximeter probe Physical Identity Dimension:110(L) × 60(W) × 23(H) mm Weight:About 120g (with Alkaline battery(2AA)) Certification CE , FDABuy Safe Product!The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item.The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG) with the code 197923, and certified by FDA of United States and CE &TUV of Europe. Payment We accept payment by PayPal. PayPal enables you to make payment quickly and securely online. 1: We accept payment via PayPal. 2: Please pay the money within 5 days after the auction ended. 3: Please offer home or mobile phone when the item's Value exceeds 100 (USD, EUR, AUD, GBP) so that we can make sure you get the item safely. Shipping 1). We will ship within 2 business day after your payement ; We ship the item by USPS first class service for USA buyers,you can get the item in 1-5 days. We ship the item by EUB(epacket) for CA,AU,UK,RU buyers.you can get the item in 10-25 days. We ship the item by Registered China Post Air Mail for the other buyers,you can get the item in 30-35 days. 2).We don't add taxes, VAT or other hidden charges. You pay us what you see on the invoice, i.e. goods subtotal + shipping cost (not include duties). Please find out as much as you can about your import taxes in your own country before bidding the item. You need to pay for the import duties in case that occurred for certain goods, or you may kindly give us some suggestions about that, we promise to do our best to help you! Terms of Sale About Warranty: We guarantees new equipment other than accessories to be free from defects in workmanship and materials for a period of twelve months (six months for spare parts) from the date of shipment under normal use and service. Our company's obligation under this warranty is limited to repairing, at our company's option, any part which upon our company's examination proves defective. Return Policy: If you receive a defective item which you want to return, please contact us within 5 days from the day you receive the item. All return items must be returned with its original packaging and accessories. If we confirm the damage happened during the shipment, we will bear the shipping cost for return. We will refund the money to you when we get the return items. Or replace item for you free of charge. About Us Contec Medical Systems focusing on research, manufacture and distribution of medical instruments,was founded in 1992 as a high-tech company. At present there are more than 1200 employees in our company.Our product line covers a wide range of 13 categories. Most of the domestic hospitals are our customers. Contec hopes to cooperate with international companies to supply more innovative design and advanced technology products We sincerely welcome you to become one of our global partners.We are looking forward to establishing a successful business relationship with you. If you have any questions or Dissatisfaction, please contact us via ebay message, we will try our best to help you to solve the problem and give you satisfied answer Contact Us Contec Medical Systems Contact name: Yoki Powered by SoldEazy Condition: New, Bundle Listing: Yes, Oximeter Type: Pulse Oximeter with Probe, MPN: 69450401, Brand: CON-TEC, Included Probe: Adult Finger Probe, Form Factor: Fingertip

encorehighenddesigners.com Insights encorehighenddesigners.com Exclusive
  •  Popularity - 1,257 views, 6.9 views per day, 182 days on eBay. Super high amount of views. 69 sold, 498 available.
  •  Price -
  •  Seller - 469+ items sold. 0% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items
Sitemap